Engineering, 18.10.2019 22:10, xelynncaldera
Annealing is a process by which steel is reheated and then cooled to make it less brittle. consider the reheat stage for a 100 mm thick plate (r = 7830 kg/m3, cp = 550 j/kg k, k = 48 w/m k). the plate initially is at 200 oc and is to be heated to a minimum temperature of 550 oc. heating is effected in a gas-fired furnace where the products of combustion at t[infinity] = 800 oc maintain a convection heat transfer coefficient of h = 250 w/m k on both surfaces of the plate.
(a) calculate the biot number for this heat transfer process.
(b) can the lumped-capacitance approximation be used to analyze this transient heat transfer process?
(c) assuming that the lowest temperature in the plate is at its midplane, calculate the dimensionless temperature at the midplane of the plate when temperature is 550 oc
(d) using the one-term approximate solution for convective heat transfer into a semi-infinite medium, calculate the fourier number required to achieve a temperature of 550 oc in the steel
(e) calculate the time required to achieve a temperature of 550 oc at the midplane of the plate.
Answers: 1
Engineering, 04.07.2019 18:10, ashleybaber4966
If a particle moves along a path such that r : (3 sin t) m and ? : 2t rad, where t is in seconds. what is the particle's acceleration in m/s in 4 seconds? a)- 16.43 b)- 16.29 c)- 15.21 d)- 13.79
Answers: 1
Engineering, 04.07.2019 18:10, settasav9641
Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.
Answers: 3
Engineering, 04.07.2019 18:10, dval1146
You are making beer. the first step is filling the glass carboy with the liquid wort. the internal diameter of the carboy is 15 in., and you wish to fill it up to a depth of 2 ft. if your wort is drawn from the kettle using a siphon process that flows at 3 gpm, how long will it take to fill?
Answers: 1
Annealing is a process by which steel is reheated and then cooled to make it less brittle. consider...
English, 24.06.2019 03:00
English, 24.06.2019 03:00