Engineering
Engineering, 18.10.2019 18:30, veronicatrejoaguiler

An undeveloped site occupies a lot that is 1,000 by 436 feet the top of the lot is 10 feet higher than the bottom. the town is considering the development of either a park or an asphalt covered parking lot. the proposal includes drainage studies for 10-year storms and 100-year storms for both the park and the arking lot a. what is the maximum distance that the runoff would travel from the top of the slope to the bottom? b. what is the time of concentration (tc) for this site? (use the kirpirch equation. note: the leading coefficient should be changed from 0.019 to 0.0078 when switching rom meters, as shown in the textbook, to feet c. find the design 10-vr flow for a park d. find the design 100-yr flow for a park e. find the design 10-yr flow for an asphalt parking lot f. find the design 100-yr flow for an asphalt parking lot hint: a range is given for the runoff coefficient (table 10.7). use the median value for the 10-yr event. you ll need to make an adjustment for the 100-yrevent (see pg. 488 of textbook) intensity-duration-frequency curve excerpts recurrence interval 10-y 9 10 12 time of concentration (min)

answer
Answers: 3

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, Candi9697
A-mn has a cubic structure with a0 0.8931 nm and a density of 7.47 g/cm3. b-mn has a different cubic structure, with a0 0.6326 nm and a density of 7.26 g/cm3. the atomic weight of manganese is 54.938 g/mol and the atomic radius is 0.112 nm. determine the percent volume change that would occur if a-mn transforms to b-mn.
Answers: 2
image
Engineering, 04.07.2019 18:10, selenamr
Ifa component is made of two or more materials with different modulus of elasticity (e), it is called a composite member and we calculate the factor·n". mention the formula for calculating n". also, ifn> 1, explain what will happen to the 1. transformed. gi) ifn 1, what will happen to the material when transformed material when
Answers: 1
image
Engineering, 04.07.2019 18:20, mjcbs21
What is the heat treatment of metals? what is the benefit of it? why and how it's useful? answer in details, do not write by hand.
Answers: 3
image
Engineering, 04.07.2019 18:20, cxttiemsp021
Atank with constant volume contains 2.27 kg of a mixture of water phases (liquid-vapor). in the initial state the temperature and the quality are 127 °c and 0.6, respectively. the mixture is heated until the temperature of 160 oc is reached. illustrate the process in a t-v diagram. then, determine (1) the mass of the vapor in kg at the initial state, (2) the final pressure in kpa.
Answers: 3
Do you know the correct answer?
An undeveloped site occupies a lot that is 1,000 by 436 feet the top of the lot is 10 feet higher th...

Questions in other subjects:

Konu
Mathematics, 24.01.2022 02:20