Engineering
Engineering, 18.10.2019 17:20, noahdeno200010125

Avery thick slab with thermal diffusivity 5.6x10^-6 m^2/s and thermal conductivity 20w/m. k js initially at a uniform temperature of 325 degree c. suddenly, the surface is exposed to a coolant at 15 degree c for which the convection heat transfer coefficient is 100 w/m^2 .k. determine temperatures at the surface and at a depth of 45 mm after 3 min have elapsed. compute and plot temperature histories (0 less than or equal to t less than or equal to 300 s) at x = 0 and x = 45 mm for the following parametric variations: alpha = 5.6 x 10^-7, 5.6 x 10^-6, and 5.6 x 10^-5 m^2/s; and k = 2, 20, and 200 w/m. k.

answer
Answers: 3

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, QueenLife4869
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
image
Engineering, 04.07.2019 19:20, ijohnh14
Apure substance is a)-mixture of various chemical elements or compounds b)-substance that has a fixed chemical composition throughout c)-mixture that is homogeneous (such as air) d)-all the answers
Answers: 3
image
Engineering, 04.07.2019 19:20, praveen35301
Amass-spring-viscous damper system of mass 3 kg has a frequency of 100 rad/s and is critically damped. its initial conditions are x(0)-3 mm and (0)-2.3 m/s. does the system overshoot its equilibrium position? prove your answer
Answers: 1
image
Engineering, 06.07.2019 02:30, Nonniel0v3
An electric motor is used to drive a power press which makes steel turning moment diagrams 323 pressings from a metal sheet. the motor runs at a mean speed of 50 rev/s. the torque required is 10.0nm for 0.2s, followed by 1.0nm for0.3 s with this sequence then being repeated. what is the minimum power required of the motor and the moment of incrtia required for the t1ywhcel if the speed fluctuations are to be restricted to 1.5%?
Answers: 3
Do you know the correct answer?
Avery thick slab with thermal diffusivity 5.6x10^-6 m^2/s and thermal conductivity 20w/m. k js initi...

Questions in other subjects:

Konu
Mathematics, 14.09.2020 07:01
Konu
Mathematics, 14.09.2020 07:01
Konu
Health, 14.09.2020 07:01
Konu
Mathematics, 14.09.2020 07:01
Konu
Mathematics, 14.09.2020 07:01
Konu
Mathematics, 14.09.2020 07:01
Konu
English, 14.09.2020 07:01
Konu
Mathematics, 14.09.2020 08:01
Konu
Mathematics, 14.09.2020 08:01
Konu
Mathematics, 14.09.2020 08:01