Engineering, 10.10.2019 21:10, ella9288

Convection, conduction, and overall u. a gas at 450 k is flowing inside a 2-in. steel pipe, schedule 40. the pipe is insulated with 51 mm of lagging having a mean k = 0.0623 w/m · k. the convective heat-transfer coefficient of the gas inside the pipe is 30.7 w/m2 · k and the convective coefficient on the outside of the lagging is 10.8. the air is at a temperature of 300 k. calculate the heat loss per unit length of 1 m of pipe using resistances. repeat, using the overall u0 based on the outside area a0.

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, colin774

The higher the astm grain size number, the finer the gran is. a)-true b)-false

Answers: 2

continue

Engineering, 04.07.2019 19:10, Calliedevore

The proportional limit is always greater than the yield strength for a material. a)-trune b)- false

Answers: 3

continue

Engineering, 04.07.2019 19:10, nbunny7208

What is the chief metrological difference between measuring with a microscope and with an electronic comparator? a. the microscope is limited to small workpieces. a. the microscope is limited to small workpieces. c. the comparator can only examine one point on the workpiece. d. the microscope carries its own standard.

Answers: 1

continue

Engineering, 04.07.2019 19:20, qurreab26

A5 kg block of fe is dropped into a very large vat of water. the fe and water initial temperatures are 95 and 25 c, respectively. the fe final temperature is 25 c and the water can be treated as a thermal reservoir,. treated as a thermal reservoir take the water to be the system and determine the entropy generation. report vour answer in kj/k.

Answers: 1

continue

Do you know the correct answer?

Convection, conduction, and overall u. a gas at 450 k is flowing inside a 2-in. steel pipe, schedule...