Engineering, 09.10.2019 22:20, HelenKellerwasaSlutt

The following test data were taken on a 5.5 kw, four-pole, 220-v, 50-hz, y-connected im having a rated current of 28 a. dc test: vdc = 13.6 v idc = 28.0 a no-load test: vl = 208 v f = 50 hz i = 8.17 a pin = 420 w locked-rotor test: vl = 25 v f = 15 hz i = 27.9 a pin = 920 w (a) determine the per-phase equivalent circuit of this motor. 4 marks (b) if the motor runs at 1425 rpm, calculate the input current drawn using the equivalent circuit parameters. 4 marks (c) solve the equivalent circuit and plot power input, input current, power output, toque, power factor as a function of speed (slip). draw the torque versus speed characteristics of the motor.

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:20, 1230bering

Select any two (2) areas of applications of chain-drive. (clo4) a)-permanent lubrication necessary b)-hydraulic forklift truck operation c)-rigging and heavy moving materials d)-relatively high maintenance costs e)-costlier than belt drives

Answers: 2

continue

Engineering, 04.07.2019 18:20, safiyabrowne7594

Ahe-xe mixture containing a 0.75 mole fraction of helium is used for cooling electronics in an avionics application. at a temperature of 300 k and atmospheric pressure, calculate the mass fraction of helium and the mass density, molar concentration and molecular weight of the mixture. if the cooling capacity is 10 l, what is the mass of the coolant?

Answers: 3

continue

Engineering, 06.07.2019 04:10, ninaaforever

Natural gas (95 percent methane and 5 percent ethane by volume) flows through a 90 cm diameter pipeline with a velocity of 3 m/s. the pressure in the pipeline is 700 kpa, and the temperature is 15°c. calculate: (a) the mass and volumetric flow rates in this pipe.

Answers: 1

continue

Engineering, 06.07.2019 04:20, madisontaegarmatus

Two microscope slides are placed horizontally, one on top of the other, with a drop of a dishwashing liquid between them. the gap between the slides is 1 mm. a machine pulls the top slide to the right with a velocity of 0.15 millimeters per second while the bottom slide is held stationary. a stress gage indicates that a shearing stress of 0.5 pa is required to pull the top slide with this velocity. if the dishwashing liquid adheres to both slides during this process, what is the viscosity of the liquid? specify whether your answer is dynamic or kinematic viscosity, and use appropriate units.

Answers: 1

continue

Do you know the correct answer?

The following test data were taken on a 5.5 kw, four-pole, 220-v, 50-hz, y-connected im having a rat...