Engineering
Engineering, 09.10.2019 09:30, rhettperkins

The closed tank of a fire engine is partly filled with water, the air space above being under pressure. a 6 cm bore connected to the tank discharges on the roof of a building 2.5 m above the level of water in the tank. the friction losses are of 45 cm of water. determine the air pressure which must be maintained in the tank to deliver 20 litres/sec on the roof.

answer
Answers: 2

Other questions on the subject: Engineering

image
Engineering, 03.07.2019 14:10, aliceohern
The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite
Answers: 3
image
Engineering, 04.07.2019 16:10, TheOriginalMeyah
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
image
Engineering, 04.07.2019 18:10, niyawilliams23
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
image
Engineering, 04.07.2019 18:10, alyssabailey7545
Give heat transfer applications for the following, (i) gas turbines (propulsion) ) gas turbines (power generation). (iii) steam turbines. (iv) combined heat and power (chp). (v) automotive engines
Answers: 1
Do you know the correct answer?
The closed tank of a fire engine is partly filled with water, the air space above being under pressu...

Questions in other subjects:

Konu
Mathematics, 18.09.2019 19:10
Konu
Mathematics, 18.09.2019 19:20