Engineering, 07.10.2019 22:20, chrismeldajbaptiste

Need asap
1. name the view that shows the width (height) of the coupling.

2. name the view in which the holes are shown as circles.

3. name the kind of line shown at e, f, g, h, i, and j.

4. what circle represents the 4.500 diameter flange?

5. what circle represents the 1. diameter?

6. name the kind of line shown at n.

7. how many holes are to be drilled in the larger flange?

8. indicate the drill size to be used.

9. give the diameter circle on which the equally spaced holes are drilled in the larger flange

10. how many holes are to be drilled in the smaller flange?

11. how deep is the 1.250 diameter hole?

12. give the diameter of the reamed holes.

13. state the angle with the horizontal center line used for locating reamed hole o.

14. what is the overall width (height) of the coupling?

15. what is the diameter of the smaller flange?

16. what is the diameter of the circle a and b?

17. what is the depth of the 1.000" hole?

18. what is the thickness of the larger flange?

19. if 5/16" bolts are used in the 7 drilled holes, what will be the clearance between the hole and the bolt?

20. determine distances c and d.

Need asap1. name the view that shows the width (height) of the coupling.2.

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, Tyrant4life

Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.

Answers: 1

continue

Engineering, 04.07.2019 19:20, brae72

Asimple speed reducer is composed of 2 spur gears. the pinion gear has a pitch diameter of 0.75" and 36 teeth while the driven gear has a pitch diameter of 4.0" and 192 teeth. a)-what is the diametral pitch of each gear? b)-if an electric motor rotating ccw at 3000 rpm is coupled to the pinion, what is the rotational speed of the driven gear? c)-if the torque delivered to the pinion is 1 n-m, what is the torque on the driven gear? d)-what is the power transmitted by the gear train?

Answers: 1

continue

Engineering, 06.07.2019 03:20, carrietaylor234

Avertical steel rod of length 2.0 m and diameter 25 mm is rigidly fixed at its upper end and has a flange at its lower, free, end. what will be the maximum stress produced in the rod when a load of 20 kn is applied, (a) gradually to the lower end, (b) suddenly to the lower end, (c) by a collar falling from a height of 50 mm on to the flange?

Answers: 3

continue

Engineering, 06.07.2019 04:10, blaqsafire9291

Aspherical thermocouple measurement errors a spherical thermocouple made of constantin transfer coefficient between the gas and the thermocouple is h used to measure the temperature of a gas. the heat 400 w/m2 k. calculate the maximum diameter d of the thermocouple if the thermocouple's measurement error should be w 23 within 5% of the initial temperature difference in 5 seconds. for constantin, k 8920 kg/m3, and c 410 j/kg. k.

Answers: 3

continue

Do you know the correct answer?

Need asap
1. name the view that shows the width (height) of the coupling.

2. name t...