Engineering, 07.10.2019 17:30, mfar3457

(7) two pg70 asphalt concrete core samples are taken from an existing flexible pavement. each sample has a diameter of 4 in. and a thickness of 2.5 in. (a) if the first sample, tested in the indirect tensile apparatus, failed under a maximum load of 2,500 lbs, calculate the tensile strength of the pg70 asphalt concrete mixture. (b) under a dynamic load of 50 lbs, applied on the second specimen in the transducer arrangement for the diametral modulus test, a horizontal recoverable deformation of 0.076*10-3 in. is measured at 70o f. what is the resilient modulus of the asphalt concrete (ac) layer in the field (use the equation on page 283)?

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, 19deleonl

Coiled springs ought to be very strong and stiff. si3n4 is a strong, stiff material. would you select this material for a spring? explain.

Answers: 2

continue

Engineering, 04.07.2019 18:20, maustin5323

Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]

Answers: 1

continue

Engineering, 04.07.2019 18:20, cristykianpour

Describe one experiment in which the glass transition temperature and melting temperature of a totally amorphous thermoplastic material can be determined. show the relevant experimental results in a diagram which should be properly annotated with the two temperatures clearly marked. what is likely to happen to the curve in the diagram if the amorphous polymer is replaced by a thermosetting type?

Answers: 2

continue

Engineering, 04.07.2019 18:20, 21megoplin

How much power could a wind turbine produce if it had the following specifications? cp = 0.45 -d=1.2kg/m3 d=50m v 5m/s

Answers: 2

continue

Do you know the correct answer?

(7) two pg70 asphalt concrete core samples are taken from an existing flexible pavement. each sample...