Engineering, 07.10.2019 18:00, qxeenjasss

Aload cell is calibrated in an environment at a temperature of 21°c and has the following deflection/load characteristics: load (kg) 0 50 100 150 200 deflection (mm) 0.0 1.0 2.0 3.0 4.0at 35°c, the measurements change to: load (kg) 0 50 100 150 200 deflection (mm) 0.2 1.3 2.4 3.5 4.6determine the sensitivity drift coefficient of the load cell in units of mm/kg/°c.

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, viicborella

Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.

Answers: 1

continue

Engineering, 04.07.2019 18:10, Candi9697

A-mn has a cubic structure with a0 0.8931 nm and a density of 7.47 g/cm3. b-mn has a different cubic structure, with a0 0.6326 nm and a density of 7.26 g/cm3. the atomic weight of manganese is 54.938 g/mol and the atomic radius is 0.112 nm. determine the percent volume change that would occur if a-mn transforms to b-mn.

Answers: 2

continue

Engineering, 04.07.2019 18:10, wyattlb97

Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?

Answers: 3

continue

Engineering, 04.07.2019 18:20, DroctorWellsfan

Inspection for bearing condition will include: (clo4) a)-color b)-smell c)-size d)-none of the above

Answers: 1

continue

Do you know the correct answer?

Aload cell is calibrated in an environment at a temperature of 21°c and has the following deflection...