Engineering
Engineering, 06.10.2019 19:20, naomicervero

Amanometer consists of an inclined glass tube which communicates with a metal cylinder standing upright; liquid fills the apparatus to a fixed zero mark on the tube when both the cylinder and the tube are open to atmosphere. the upper end of the cylinder is then connected to a gas supply at a pressure p and manometer liquid rises through a distance l in the tube. establish the relation;
h=sl [ sin(alpha) + (d/d)^2 ]

for the pressure head h of water column in terms of inclination alpha of the tube, specific gravity s of the fluid, and ratio of diameter d of the to the diameter d of the cylinder.

also determine the value of so that the error disregarding the change in level in the cylinder will not exceed 0.1 percent when = .

answer
Answers: 2

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:20, luisgonz5050
Find the kinematic pressure of 160kpa. for air, r-287 j/ kg k. and hair al viscosity of air at a temperature of 50°c and an absolute (10 points) (b) find the dynamic viscosity of air at 110 °c. sutherland constant for air is 111k
Answers: 3
image
Engineering, 04.07.2019 19:10, nida7864
An engine, weighing 3000 n, is supported on a pedestal mount. it has been observed that the engine induces vibration into the surrounding area through its pedestal at the maximum operating speed. determine the stiffness of the dynamic vibration absorber spring in (n/m) that will reduce the vibration when mounted on the pedestal. the magnitude of the exciting force is 250 n, and the amplitude of motion of the auxiliary mass is to be limited to 2 mm note: in this question type-in right numbers, no decimals, no fractions, no unit. approximate to right number if needed
Answers: 3
image
Engineering, 04.07.2019 19:20, praveen35301
Amass-spring-viscous damper system of mass 3 kg has a frequency of 100 rad/s and is critically damped. its initial conditions are x(0)-3 mm and (0)-2.3 m/s. does the system overshoot its equilibrium position? prove your answer
Answers: 1
image
Engineering, 04.07.2019 19:20, mercedesamatap21hx0
To design a steam turbine to produce 12,000 hp power. a engineer comsiders using a steady state stean low st 1160fr and engineer considers using a steady state steam flow at 1160°r and 450 psia to drive this steam turbine. the exhaust of the steam is cooled by the lake (vacuum). heat losing to the surroundings is measured at a rate of 555.55 btu/s. (a) sketch the system with the given conditions. (b) neglecting kinetic and potential energy changes from inlet to exit, determine the volumetric flow rate of the steam at the inlet, (ft'/hr). must clearly show unit conversions at crtical terms.
Answers: 1
Do you know the correct answer?
Amanometer consists of an inclined glass tube which communicates with a metal cylinder standing upri...

Questions in other subjects:

Konu
Mathematics, 01.03.2021 21:50