Engineering, 06.10.2019 07:30, GLASGOWANASTASIA

The wall of drying oven is constructed by sandwiching insulation material of thermal conductivity k = 0.05 w/m°k between thin metal sheets. the oven air is at = 300℃, and the corresponding convection coefficient is ℎ = 30 w/ m2 °k. the inner wall absorbs a radiant flux of ′′= 100 w/ m2 from hotter objects within the oven. the room air at t[infinity],o= 25℃, and overall coefficient for convection and radiation from the outer surface is ℎo = 10 w/ m2 °k. what insulation thickness l is required to maintain the outer wall surface at a safe-to-touch temperature of to = 40 degree c?

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 16:10, TheOriginalMeyah

An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)

Answers: 2

continue

Engineering, 04.07.2019 18:10, danksans7011

The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false

Answers: 1

continue

Engineering, 04.07.2019 18:10, colin774

The higher the astm grain size number, the finer the gran is. a)-true b)-false

Answers: 2

continue

Engineering, 04.07.2019 18:10, mamasbug4285

An air compression refrigeration system is to have an air pressure of 100 psia in the brine tank and an allowable air temperature increase of 60°f for standard vapor compression cycle temperatures of 77 f entering the expansion cylinder and 14 f entering the compression cylinder, calculate the coefficient of performance a. 2.5 b 3.3 c. 4.0 d. 5.0

Answers: 3

continue

Do you know the correct answer?

The wall of drying oven is constructed by sandwiching insulation material of thermal conductivity k...