Engineering, 05.10.2019 10:30, babytony1210

Acylindrical drum (2 ft. dia ,3 ft height) is filled with a fluid whose density is 40 lb/ft^3. determine (a. the total volume of a fluid, (b) its total mass in pound and slugs, (c) its specific volume, and (d) its specific weight where g= 31.90 fps^2

Answers: 3

Show answers

Answers

answered: Lnjayy

The determined values for the fluid

a.) The volume of the fluid is 3 × π ft.³ (approximately 9.425 ft.³)b.) The mass of the fluid in pounds is 120·π lb (approximately 376.99 m) The mass of the fluid in slugs is approximately 11.72 slugsc) The specific volume, is approximately 40.02 lbf/ft.³

The reasons why the above values are correct are given as follows;

The known parameter are;

Dimensions of the cylindrical drum, are;

Diameter, D = 2 ft.

Height, h = 3 ft.

Density of the fluid, ρ = 40 lbf/ft.³

(a) The total volume of fluid is given by the formula for the volume of a cylinder which is presented as follows;

$V = \pi \times \dfrac{D^2}{4} \times h$

Therefore;

$Volume \ of \ a \ cylinder, \ V = \pi \times \dfrac{2^2}{4} \times 3 = 3 \cdot \pi$

The volume of the cylinder, V = 3·π ft.³

The volume of the cylinder = The volume of the fluid = 3 × π ft.³

(b) Mass = Density × Volume

The total mass of the fluid = The total volume of the fluid × Fluid density

∴ The total mass of the fluid = 3·π ft.³ × 40 lb/ft.³ = 120·π lb

The mass in slugs;

1 slug = 32.1740 lb

$1 \, lb = \dfrac{1 \, slug}{32.1740 }$

$120 \cdot \pi \, lb = 120 \cdot \pi \times \dfrac{1 \, slug}{32.1740 } \approx 11.72 \ slugs$

$Specific \ volume = \dfrac{V}{m}$

Therefore;

$Specific \ volume = \dfrac{3 \cdot \pi \ ft.^3}{120 \cdot \pi \ lb} = \dfrac{1}{40} \, \dfrac{ft.^3}{lb} = 0.025 \ \dfrac{ft.^3}{lb}$

(d) The specific weight, γ, is the weight per unit volume

The specific weight is given as follows;

γ = ρ·g

Where;

g = Acceleration due to gravity = 31.90 fps²

Which gives;

γ = 40 lb/ft.³ × 31.90 fps² = 1,276 lb/(ft.²·s²) ≈ 40.02 lbf/ft.³

Learn more about volume, mass, and specific volume of a fluid here:

link

answered: bbrid8590

a) $V=9.42\ ft^3$

b)Mass in lb = 376.8 lb

Mass in slug = 11.71 slug

c) $v=0.025\ ft^3/lb$

d) $w=1276 \ lb/ft.s^2$

Explanation:

Given that

d= 2 ft

r= 1 ft

h= 3 ft

Density

$\rho = 40\ lb/ft^3$

We know that volume V given as

$V=\pi r^2 h$

$V=\pi \times 1^2\times 3$

$V=9.42\ ft^3$

Mass = Density x volume

$mass =40\times 9.42\ lb$

mass= 376.8 lb

We know that

1 lb = 0.031 slug

So 376.8 lb= 11.71 slug

Mass in lb = 376.8 lb

Mass in slug = 11.71 slug

we know that specific volume(v) is the inverse of density.

$v=\dfrac{1}{\rho}\ ft^3/lb$

$v=\dfrac{1}{40}\ ft^3/lb$

$v=0.025\ ft^3/lb$

Specific weight(w) is the product of density and the gravity(g).

w= ρ X g

w = 40 x 31.9

$w=1276 \ lb/ft.s^2$

answered: Guest

d would be the most obvious choice to this question. leaders are supposed to herd their underlings like a shepherd to sheep. a leader should also listen to others when they are talking to one other to gain a better understanding of their mission and surroundings.

explanation:

answered: Guest

answer:

explanation:

assault rifle is a rapid-fire, magazine-fed rifle designed for military use. it is a shoulder-fired weapon that allows the shooter to select between semi-automatic (requiring you pull the trigger for each shot), fully automatic (hold the trigger and the gun continuously fires) or three-shot-burst modes.

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:20, rocio5649

Amixture of slurry and mud is to be pumped through a horizontal pipe of diameter 500 mm. the fluid behaves as a bingham plastic with a yield stress of 30 pa and viscosity 0.04 pa. s. describe the effects of the shear stress through a transverse section of the pipe by plotting the variation in shear stress and velocity profile: (i) just before the slurry starts to move (ii) as the slurry flows when the pressure gradient is double that in part (i)

Answers: 3

continue

Engineering, 04.07.2019 19:10, kimmy6973

What is creep? what is stress relaxation?

Answers: 1

continue

Engineering, 04.07.2019 19:10, juneham

Estimate the change in specific internal energy au and specific enthalpy h from inlet to outlet for ethylene glycol (a liquid) flowing through each of the following devices: (a) a heat exchanger where the glycol temperature increases from 20 °c to 80 °c; (b) a pump operating at about 25 °c and increasing the glycol pressure from 100 kpa to 8 mpa.

Answers: 2

continue

Engineering, 04.07.2019 19:20, lovenahofer

Apreheater involves the use of condensing steam at 100°c on the inside of a bank of tubes to heat air that enters at 1 atm and 25°c. the air moves at 5 m/s in cross flow over the tubes. each tube is 1 m long and has an outside diameter of 10 mm. what is the minimum value of nl needed to achieve an outlet temperature of t 75 c? what is the corresponding pressure drop across the tube bank?

Answers: 3

continue

Do you know the correct answer?

Acylindrical drum (2 ft. dia ,3 ft height) is filled with a fluid whose density is 40 lb/ft^3. deter...