Engineering, 01.10.2019 23:10, ineedhelp2285
The heat transfer coefficient for hydrogen flowing over a sphere is to be determined by observing the temperatureātime history of a sphere fabricated from pure copper. the sphere, which is 20.0 mm in diameter, is at 80Ā°c before it is inserted into the gas stream having a temperature of 27Ā°c. a thermocouple on the outer surface of the sphere indicates 50Ā°c 97 s after the sphere is inserted into the hydrogen.(a) what is the value of the specific heat of the copper at the average temperature of the process, in j/kgĀ·k? (b) what is the value of the lumped thermal capacitance of the sphere, in j/k? (c) solve for the thermal time constant, in sec.(d) what is the value of the heat transfer coefficient, in w/m2Ā· k? (e) what is the value of the biot number?
Answers: 1
Other questions on the subject: Engineering
Engineering, 04.07.2019 18:10, bckyanne3
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 18:10, winterblanco
The higher the astm grain-size number, the coarser the grain is. a)-true b)-false
Answers: 3
Do you know the correct answer?
The heat transfer coefficient for hydrogen flowing over a sphere is to be determined by observing th...
Questions in other subjects:
Mathematics, 13.12.2019 03:31
Social Studies, 13.12.2019 03:31
Mathematics, 13.12.2019 03:31
