Engineering
Engineering, 30.09.2019 21:20, JazzyJo2580

As a manufacturing automation engineer, you are asked to design a control system to automate a bottle-filler machine for bottled water. empty bottles are moved into position beneath the filler nozzle one at time by a conveyor moved by a stepping motor. once a bottle is in position underneath the nozzle, the control system actuates a valve (using an actuator) allowing the water to flow into the bottle. a sensor measures the flow rate and sends it to the control system. the control system determines when to close the valve (using an actuator) to achieve the desired volume of water in the bottle based on the flow rate. the valve is closed via a signal from the control system and the stepping motor advances the next bottle. using the list of sensors and actuators given in the course lectures, design and describe what are the appropriate sensors and actuator to be used to automate the water-filler machine for bottled water. include in your description of the control system, the type of input/output signals (such as binary, analog, and how the system is to utilize the input/output data.

answer
Answers: 3

Other questions on the subject: Engineering

image
Engineering, 03.07.2019 15:10, breannaasmith1122
Two flowing streams of argon gas are adiabatically mixed to form a single flow/stream. one stream is 1.5 kg/s at 400 kpa and 200 c while the second stream is 2kg/s at 500 kpa and 100 ? . it is stated that the exit state of the mixed single flow of argon gas is 150 c and 300 kpa. assuming there is no work output or input during the mixing process, does this process violate either the first or the second law or both? explain and state all your assumptions.
Answers: 1
image
Engineering, 03.07.2019 15:10, theamandawhite
Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.
Answers: 1
image
Engineering, 04.07.2019 12:10, Ryantimes2
On a average work day more than work place firs are reorted
Answers: 1
image
Engineering, 04.07.2019 16:10, Arealbot
The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.
Answers: 1
Do you know the correct answer?
As a manufacturing automation engineer, you are asked to design a control system to automate a bottl...

Questions in other subjects: