Engineering
Engineering, 29.09.2019 01:30, jocelynmarquillo1

During isobaric process wet water steam at temperature t = 223.94°c and pressure p = 25 bar changed its density from 14.5 kg/m' to 400 kg/m3. in the initial state wet steam occupied 0.1m^3. find initial and final quality of steam, work done by steam, amount of heat exchanged with the surroundings and entropy generated in the process if heat was transferred to the surroundings at 300 k. draw the process at the enthalpy-entropy diagram. from tables for p = 25 bar: specific volume of boiling water 0.0011974 m^3/kg, specific volume of saturated vapour 0.08 m^3/kg, heat of vaporization: 1838.98 kj/kg, specific heat of water: 4.19 kj/(kgk).

answer
Answers: 2

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, DestyHilBan1183
Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.
Answers: 3
image
Engineering, 04.07.2019 18:10, lowkeyqueenk
Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk
Answers: 1
image
Engineering, 04.07.2019 18:10, Tyrant4life
Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.
Answers: 1
image
Engineering, 04.07.2019 18:10, dval1146
You are making beer. the first step is filling the glass carboy with the liquid wort. the internal diameter of the carboy is 15 in., and you wish to fill it up to a depth of 2 ft. if your wort is drawn from the kettle using a siphon process that flows at 3 gpm, how long will it take to fill?
Answers: 1
Do you know the correct answer?
During isobaric process wet water steam at temperature t = 223.94°c and pressure p = 25 bar changed...

Questions in other subjects:

Konu
Mathematics, 18.03.2021 19:20
Konu
Mathematics, 18.03.2021 19:20
Konu
Mathematics, 18.03.2021 19:20