Engineering, 28.09.2019 00:30, sedratkawaiah13

A25-mm thick aisi 1020 steel plate is sandwiched between two 12-mm thick 2024-t3 aluminum plates and compressed with a bolt and nut with no washers. the bolt is m12 × 1.5, property class 5.8. (a) determine a suitable length for the bolt, rounded up to the nearest 5 mm. (b) determine the bolt stiffness. (c) determine the stiffness of the members.

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, kayabwaller4589

When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point

Answers: 3

continue

Engineering, 03.07.2019 14:10, volleyballfun24

If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.

Answers: 3

continue

Engineering, 04.07.2019 18:10, johnthienann58

Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented

Answers: 2

continue

Engineering, 04.07.2019 18:10, redrosesxx

Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux

Answers: 3

continue

Do you know the correct answer?

A25-mm thick aisi 1020 steel plate is sandwiched between two 12-mm thick 2024-t3 aluminum plates and...