An intercooler is installed between stages of a two-stage air compressor to reduce compressed air’s temperature (see the figure below). the compressed air flows through the intercooler whose inner and outer diameter are 5 and 6 cm, respectively. to simplify the solution, the outer walls are assumed to be at a temperature of 185 oc. to increase the heat transfer for the intercooler, circular aluminium alloy 2024-t6 fins (k=186 w/m. k) of outer diameter 15 cm and constant thickness 1 mm are attached to the intercooler. the space between the fins is 1 mm, and there are 15 fins per meter length of the intercooler. heat is transferred to the surrounding air at t[infinity] = 25 oc, with a convection heat transfer coefficient of 40 w/m2.k. (i) determine the heat transfer from the intercooler for its total length with no fins added.(ii) determine the heat transfer from the intercooler for its total length as a result of the fins added. (iii) determine the percentage increase in heat transfer from the intercooler for its total length as a result of the fins added. also, comment on the value. (iv) determine the overall and individual fin effectiveness

Idon’t know what the answer is i wish i could

Infrared sensor is most used sensor in wireless technology where remote controlling functions and detection of surrounding objects/ obstacles are involved. this post will discuss about what is infrared sensor, its working principle, how it works, types, applications, advantages and disadvantages. what is infrared sensor

ir sensor is a simple electronic device which emits and detects ir radiation in order to find out certain objects/obstacles in its range. some of its features are heat and motion sensing.

ir sensors use infrared radiation of wavelength between 0.75 to 1000µm which falls between visible and microwave regions of electromagnetic spectrum. ir region is not visible to human eyes. infrared spectrum is categorized into three regions based on its wavelength i.e. near infrared, mid infrared, far infrared.

wavelength regions of infrared spectrum

near ir – 0.75µm to 3 µm
mid ir – 3 µm to 6 µm
far ir – > 6 µm
1 introduction to infrared sensor

fig. 1 – introduction to infrared sensor

working principle of infrared sensor

infrared sensors works on three fundamental physics laws:

planck’s radiation law: any object whose temperature is not equal to absolute zero (0 kelvin) emits radiation.
stephan boltzmann law: the total energy emitted at all wavelengths by a black body is related to the absolute temperature.
wein’s displacement law: objects of different temperature emit spectra that peak at different wavelengths that is inversely proportional to temperature.
key elements of infrared detection system

the key elements of infrared detection system are:

ir transmitter

ir transmitter acts as source for ir radiation. according to plank’s radiation law, every object is a source of ir radiation at temp t above 0 kelvin. in most cases black body radiators, tungsten lamps, silicon carbide, infrared lasers, leds of infrared wavelength are used as sources.

transmission medium

as the name suggests, transmission medium provides passage for the radiation to reach from ir transmitter to ir receiver. vacuum, atmosphere and optical fibers are used as medium.

ir receiver

generally ir receivers are photo diode and photo transistors. they are capable of detecting infrared radiation. hence ir receiver is also called as ir detector. variety of receivers are available based on wavelength, voltage and package.

ir transmitter and receivers are selected with matching parameters. some of deciding specifications of receivers are photosensitivity or responsivity, noise equivalent power and detectivity.