Engineering
Engineering, 27.09.2019 23:30, jwbri

An open belt 100 mm wide connects two pulleys mounted on parallel shafts with their centres 2.4 m apart. the diameter of the larger pulley is 450 mm and that of the smaller pulley 300 mm. the coeffi- cient of friction between the belt and the pulley is 0.3 and the maximum stress in the belt is limited to 14 n/mm width. if the larger pulley rotates at 120 r. p.m., find the maximum power that can be transmitted

answer
Answers: 1

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:20, sanchez626
Aheavily insulated piston-cylinder device contains 0.02 m3 of steam at 300 kpa and 200 °c. 1.2 mpa. d this process. team is now compressed in a reversible manner to a pressure of etermine the entropy change and the work done on the steam during this process
Answers: 1
image
Engineering, 04.07.2019 19:10, pjgolden04
How to increase the thermal officiency of an ideal simple rankino cycle? among these methods, which one is the best and why?
Answers: 2
image
Engineering, 06.07.2019 04:10, j015
Apinion having 30 involute teeth of 6,5 module rotates at 220 r/min and transmits 2 kw to a gear wheel having 70 teeth; the addendum on both wheels is 4 of the circular pitch and the angle of obliquity is 200. determine; 3.1 the lengths of the path of approach and the arc of approach 3.2 the normal force between the teeth at an instant when there is only one pair of teeth in contact
Answers: 2
image
Engineering, 06.07.2019 04:20, Okeh4001
An insulated tank truck containing 50,000 pounds of double-distilled, deionized water at 30 °c is pumped into a closed, refrigerated storage tank maintained at 5 °c in a facility located on top of mount mitchell, north carolina (elevation 6,684 feet & average july temperature of 84 °f). a)-determine the volume of the storage tank required to hold the purified water. b)- determine the initial and final pressure differences that must be overcome by a liquid pump assuming the storage tank initially contains air at 5 °c. assume the air is slowly bled out of the storage tank during the water transfer c.) during a routine operation today, the tank is slightly ruptured by a stainless steel pipe and a water acrosol of droplets begins to spray out of the storage tank. state all assumptions and determine the internal pressure within the water droplets produced
Answers: 1
Do you know the correct answer?
An open belt 100 mm wide connects two pulleys mounted on parallel shafts with their centres 2.4 m ap...

Questions in other subjects:

Konu
Arts, 10.02.2020 22:47