Engineering, 26.09.2019 17:10, lrich20200

The mean breaking strength of yarn used in manufacturing drapery material is required to be at least 100 psi. past experience has indicated that the standard deviation of breaking strength is 2.8 psi. a random sample of 9 specimens is tested, and the average breaking strength is found to be 100.6 psi. statistical tables and charts (a) calculate the p-value. round your answer to 3 decimal places (e. g. 98.765). if alpha equals 0.05, should the fiber be judged acceptable? the tolerance is +/-2% (b) what is the probability of not rejecting the null hypothesis at alpha ⁢ equals 0.05 if the fiber has a true mean breaking strength of 102 psi? round your answer to 3 decimal places (e. g. 98.765). the tolerance is +/-2% (c) find a 95% one-sided lower confidence interval bound on the true mean breaking strength. round your answer to three decimal place (e. g. 98.765). the tolerance is +/-2% (d) use the confidence interval found in part (c) to test the hypothesis upper h subscript 0. (e) what sample size is required to detect a true mean breaking strength of 101 with probability 0.95?

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, abdirahmansoloman

Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?

Answers: 1

continue

Engineering, 04.07.2019 18:10, lerasteidl

Determine whether or not it is possible to compress air adiabatically from k to 140 kpa and 400 k. what is the entropy change during this process?

Answers: 3

continue

Engineering, 04.07.2019 18:20, RiverH246

Air flows over a heated plate àt a velocity of 50m/s. the local skin factor coefficient at a point on a plate is 0.004. estimate the local heat transfer coefficient at this point. the following property data for air are given: density = 0.88kg/m3 , viscosity 2.286 x 10 ^-5 kgm/s , k = 0.035w/mk ,cp = 1.001kj/kgk. use colburn reynolds analogy.

Answers: 1

continue

Engineering, 04.07.2019 19:10, Destinationz

Asteam is contained in a rigid tank with a volume of 1 m3. initially, the pressure and temperature are 7 bar and 500 oc, respectively. the temperature drops due to cooling process. determine: (1) the temperature at which condensation begins in °c, (2) the fraction of the total mass that has condensed when the pressure decreased to 0.5 bar. (3) the volume in m3 occupied by saturated liquid at the final state?

Answers: 3

continue

Do you know the correct answer?

The mean breaking strength of yarn used in manufacturing drapery material is required to be at least...