Engineering, 25.09.2019 05:00, ccispoppin12

A5/8-in.-diameter steel rod ab is fitted to a round hole near end c of the wooden member cd. the ultimate strength of the wood used is 8 ksi in tension and 1 ksi in shear, while the ultimate shear strength of the steel is 22 ksi. determine (a) the factor of safety for the pin, (b) the average bearing stress in the wood, (c) the required value of b if the factor of safety for the wooden member in shear is 3.0, (d) the maximum average normal stress in the wood.

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 03:10, lauriepdx17

What precautions should you take to prevent injuries when dealing with heavy loads?

Answers: 1

continue

Engineering, 04.07.2019 18:10, qwertylol12345

Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.

Answers: 2

continue

Engineering, 04.07.2019 18:10, Tyrant4life

Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.

Answers: 1

continue

Engineering, 04.07.2019 19:10, jimena15

10 kg of co2 is initially contained at 400 kpa and 300 k. the gas constant for carbon dioxide is 189 j/lkg k) and has a specific heat ratio, k, of 1.289. isentropic expansion then occurs until the pressure is 200 kpa. a) determine the initial volume of co2 in m. b) determine the final temperature in k. c) determine the work done by the system during the expansion kl.

Answers: 2

continue

Do you know the correct answer?

A5/8-in.-diameter steel rod ab is fitted to a round hole near end c of the wooden member cd. the ult...