Engineering
Engineering, 21.09.2019 00:30, bajnathhannavanna

The pentium 4 prescott processor, released in 2004, had a clock rate of 3.6 ghz and voltage of 1.25 v. assume that, on average, it consumed 10 w of static power and 90 w of dynamic power. the core i5 ivy bridge, released in 2012, has a clock rate of 3.4 ghz and voltage of 0.9 v. assume that, on average, it consumed 30 w of static power and 40 w of dynamic power. 1.8.1 [5] < §1.7> for each processor find the average capacitive loads. 1.8.2 [5] < §1.7> find the percentage of the total dissipated power comprised by static power and the ratio of static power to dynamic power for each technology. 1.8.3 [15] < §1.7> if the total dissipated power is to be reduced by 10%, how much should the voltage be reduced to maintain the same leakage current? note: power is defined as the product of voltage and current.

answer
Answers: 2

Other questions on the subject: Engineering

image
Engineering, 03.07.2019 15:10, EmilySerna
Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.
Answers: 1
image
Engineering, 04.07.2019 18:10, aaliyah80
The drive force for diffusion is 7 fick's first law can be used to solve the non-steady state diffusion. a)-true b)-false
Answers: 1
image
Engineering, 04.07.2019 18:20, esmemaluma00
Find the minimum film thickness for a journal bearing with the data below. shaft diameter, d-50 mm, clearance ratio, cdratio? 0.001, shaft speed, n 2000 rpm; bearing length. i 200 mm; eccentricity ration, ? -0.55. ( note, cdratio-ca/d) the minimum film thickness is um
Answers: 2
image
Engineering, 04.07.2019 19:10, jrcspiderman2003
Asteel wire of 2 mm diameter is fixed between two points located 2 m apart. the tensile force in the wire is 250n, if its density of steel is given by 7830 kg/m3 the fundamental frequency of vibration hz? ?
Answers: 3
Do you know the correct answer?
The pentium 4 prescott processor, released in 2004, had a clock rate of 3.6 ghz and voltage of 1.25...

Questions in other subjects:

Konu
Mathematics, 26.05.2021 21:10
Konu
Mathematics, 26.05.2021 21:10
Konu
Mathematics, 26.05.2021 21:10