Engineering, 21.09.2019 00:30, ShundaBaker

Atruncated solid cone is of circular cross section, and its diameter is related to the axial coordinate by an expression of the form d=ax3/2 , where a= 1.0 m-1/2. the sides are well insulated, while the top surface of the cone at x1 is maintained at t1 and the bottom surface at x2 is maintained at t2 . what is the rate of heat transfer across the cone if it is constructed of pure aluminum with x1= 0.075 m, t1= 135°c, x2= 0.225 m, and t2= 20°c? evaluate the properties of aluminum at t¯= 333 k

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, sarahgrindstaff123

Afluid flows with a velocity field given by v=(x/t)i.. determine the local and convective accelerations when x=3 and t=1.

Answers: 2

continue

Engineering, 04.07.2019 18:10, tobyhollingsworth178

Which from the following instrument is commonly used to detect the high pitch butzing sound in bearings? [clo4] a)-digital ultrasonic meter b)-infrared camera c)-spectroscopic d)-vibrometer

Answers: 2

continue

Engineering, 04.07.2019 18:20, kodyclancy

Aquick transition of the operating speed of a shaft from its critical speed will whirl amplitude. (a) increase (b) limit (c) not affect (d) zero

Answers: 2

continue

Engineering, 04.07.2019 18:20, esmemaluma00

Find the minimum film thickness for a journal bearing with the data below. shaft diameter, d-50 mm, clearance ratio, cdratio? 0.001, shaft speed, n 2000 rpm; bearing length. i 200 mm; eccentricity ration, ? -0.55. ( note, cdratio-ca/d) the minimum film thickness is um

Answers: 2

continue

Do you know the correct answer?

Atruncated solid cone is of circular cross section, and its diameter is related to the axial coordin...