Engineering, 19.09.2019 19:00, seddy86

20.1-6. drying of wood. a flat slab of douglas fir wood 50.8 mm thick and containing 30 wt % moisture is being dried from both sides (neglecting ends and edges). the equilibrium moisture content at the surface of the wood due to the drying air blown over it is held at 5 wt % moisture. the drying can be assumed to be represented by a diffusivity of 3.72 × 10 –6 m2 /h. calculate the time for the center to reach 10% moisture.

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, Candi9697

A-mn has a cubic structure with a0 0.8931 nm and a density of 7.47 g/cm3. b-mn has a different cubic structure, with a0 0.6326 nm and a density of 7.26 g/cm3. the atomic weight of manganese is 54.938 g/mol and the atomic radius is 0.112 nm. determine the percent volume change that would occur if a-mn transforms to b-mn.

Answers: 2

continue

Engineering, 04.07.2019 18:20, sarah7984

Vibration monitoring this technique uses the noise or vibration created by mechanical equipment and in seme cases by plant systems to detemine their actual condtion. a)- true b)- false

Answers: 2

continue

Engineering, 04.07.2019 18:20, jessie8022

Apiston-cylinder device contains 0.1 m3 of liquid water and 0.9 m3 of water vapor in equilibrium at 800 kpa. heat is transferred at constant pressure until the temperature of water reaches 350 °c. determine (a) the quality of water at the initial state (b) the work associated with this process, (c) the heat associated with this process.

Answers: 2

continue

Engineering, 04.07.2019 19:10, Calliedevore

The proportional limit is always greater than the yield strength for a material. a)-trune b)- false

Answers: 3

continue

Do you know the correct answer?

20.1-6. drying of wood. a flat slab of douglas fir wood 50.8 mm thick and containing 30 wt % moistur...