Engineering, 18.09.2019 04:00, cj31150631
Your younger brother likes to rub his feet on the carpet and then touch you to give you a shock. while you are trying to escape the shock treatment, you discover a hollow metal cylinder in your basement, large enough to climb inside. in which of the following cases will you not be shocked? you climb inside the cylinder, making contact with the inner surface, and your charged brother touches the outer metal surface. both of you are outside the cylinder, touching its outer metal surface but not touching each other directly. your charged brother is inside touching the inner metal surface and you are outside, touching the outer metal surface.
Answers: 1
Engineering, 04.07.2019 18:10, salazjlove
Which of the following refers to refers to how well the control system responds to sudden changes in the system. a)-transient regulation b)- distributed regulation c)-constant regulation d)-steady-state regulation
Answers: 1
Engineering, 04.07.2019 18:10, 0436500
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 18:20, karatsgrande3772
Determine the damped natural frequencies and the steady state response of a decoupled damped forced two degrees of freedom system. 10ä1 + 2q1 20q1 10 cos t; 10q2 +4q2 + 40q2 10 cos t
Answers: 3
Engineering, 04.07.2019 18:20, moneywaydaedae
Air is compressed isentropically from an initial state of 300 k and 101 kpa to a final temperature of 1000 k. determine the final pressure using the following approaches: (a) approximate analysis (using properties at the average temperature) (b) exact analysis
Answers: 1
Your younger brother likes to rub his feet on the carpet and then touch you to give you a shock. whi...
Mathematics, 08.10.2019 01:30
Mathematics, 08.10.2019 01:30