Engineering, 14.09.2019 05:30, tyneshiajones124
Heat transfer in an iron: consider the base plate of a 1200- w household iron that has a thickness of l = 0.5 cm, base area of a = 300 cm2 , and thermal conductivity of k = 15w/m–k. the inner surface of the base plate is subjected to uniform heat flux generated by the resistance heaters inside, and the outer surface is exposed to ambient air and large surroundings at t_infinity = t_surface. the areas of both the inner and outer surfaces are a_s = 0.040 m2. an approximately uniform heat flux of q'' = 1.25x10^4 w/m2 is applied to the inner surface of the base plate, and the convection coefficient at the outer surface is h = 10 w/m2*k.(a) sketch the system and simplify the energy balance equation for the base plate, taking radiative effects into account.
Answers: 1
Other questions on the subject: Engineering
Engineering, 03.07.2019 14:10, bryneosburn
Line joining liquid phase with liquid and solid phase mixture is known as: a) liquidus b) solidus c) tie line d) none of the mentioned
Answers: 2
Engineering, 04.07.2019 18:20, AnonymousLizard52303
A2-m rigid tank initially contains saturated water vapor at 100 kpa. the tank is connected to a supply line through a valve. steam is flowing in the supply line at 600 kpa and 300 c. the valve is opened, and steam is allowed to enter the tank until the pressure in the tank reaches the line pressure, at which point the valve is closed. a thermometer placed in the tank indicates that the temperature at the final state is 200°c. determine (a) the mass of steam that has entered the tank (b) the amount of heat transfer.
Answers: 3
Engineering, 04.07.2019 18:20, Doogsterr
For each of the following process: a) sketch the p-v diagram, b)sketch t-s diagram, c) sketch t-v diagram, d) sketch the boundary work on one of the diagrams (a, b or c) and e) sketch the reversible heat transfer on one of the diagrams (a, b or c): 1- isobaric process from compressed liquid to superheated vapor 2- isothermal process from compressed liquid to superheated vapor 3- isentropic process from compressed liquid to superheated vapor
Answers: 3
Engineering, 04.07.2019 19:10, justkevin1231
Which of the following is the most important advantage of a large field of view? a. allows larger areas to be examined b. relieves eyestrain c. minimizes parallax errors. d. increases precision in proportion to the in- crease in field of view
Answers: 2
Do you know the correct answer?
Heat transfer in an iron: consider the base plate of a 1200- w household iron that has a thickness...
Questions in other subjects:
Geography, 26.04.2021 05:40
Social Studies, 26.04.2021 05:40
Computers and Technology, 26.04.2021 05:40
