Engineering, 14.09.2019 05:30, michael1498

A400-m^3 storage tank is being constructed to hold lng, liquefied natural gas, which may be assumed to be essentially pure methane. if the tank is to contain 90% liquid and 10% vapor, by volume, at 150 k, what mass of lng (kg) will the tank hold? what is the quality in the tank?

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 19:20, littlepotato10

To save energy, the air supply to a 2000 ft office has been shut off overnight and the room temperature has dropped to 40°f. in the morning, the thermostat is reset to 70°f and warm air at 120 f begins to flov in at 200ft'/min. the air is well mixed within the room, and an equal mass flow of air at room temperature (changing with time) is withdrawn through a return duct. the air pressure is nearly 1 atm everywhere. ignoring heat transfer with the surroundings and kinetic and potential energy effects, estimate how long it takes for the room temperature to reach 70°f. plot the room temperature as a function of time.

Answers: 1

continue

Engineering, 06.07.2019 02:30, piperk19

Define thermoplastic polymers and thermosetting polymers in terms of their structures, and (ii) describe briefly a process suitable for the production of products from each type of polymer.

Answers: 3

continue

Engineering, 06.07.2019 02:30, heavenwagner

A12 mm diameter shaft runs in a plain cylindrical bush 30 mm long that is located in an 18 mm diameter hole in a housing. the shaft-inner bush fit is h8 f and the outer bush-housing fit is h7-p6. make a fully cimensioned sketch of the bush with tolerances. find the maximum and minimum clearance or interference for both fits on the inner and outer diameters of the bush

Answers: 3

continue

Engineering, 06.07.2019 03:20, Giabear23

Major ingredients of traditional ceramics (a) silica (b) clay (c) feldspar (d) all

Answers: 1

continue

Do you know the correct answer?

A400-m^3 storage tank is being constructed to hold lng, liquefied natural gas, which may be assumed...