Engineering, 14.09.2019 04:20, danni51

The armature (slender rod) ab has a mass of 0.2 kg and can pivot about the pin at a. movement is controlled by the electromagnet e, which exerts a horizontal attractive force on the armature at b of fh = (0.2(kt3)/"2) n, where / in meters is the gap between the armature and the magnet at any instant. if the armature lies in the horizontal plane, and is originally at rest, determine the speed of the contact at b the instant t = 0.01 m. originally l = 0.02 m.

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, volleyballfun24

If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.

Answers: 3

continue

Engineering, 04.07.2019 18:10, winterblanco

The higher the astm grain-size number, the coarser the grain is. a)-true b)-false

Answers: 3

continue

Engineering, 04.07.2019 18:10, Tyrant4life

Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.

Answers: 1

continue

Engineering, 04.07.2019 18:10, wirchakethan23

Hydraulic fluid with a sg. of 0.78 is flowing through a 1.5 in. i. d. pipe at 58 gal/min. the fluid has an absolute viscosity of 11.8 x 105 lbf-sec/ft2. is the flow laminar, turbulent or within the critical range? give both a numerical reynolds number and a term answer.

Answers: 3

continue

Do you know the correct answer?

The armature (slender rod) ab has a mass of 0.2 kg and can pivot about the pin at a. movement is con...