Engineering, 14.09.2019 03:10, Ully4559
Alarge chamber contains air at 80 psia and 600 r at zero velocity. the air enters a converging- diverging nozzle which has an area ratio (exit/throat) of 3.0 a) what pressure must exist in the receiver for the nozzle to operate at its first critical point? the flow will reach sonic at the throat then decelerate to subsonic conditions at the exit b) what should the receiver pressure be for operating at the third critical point where supersonic flow exits the nozzle? if operating at the third critical point, what are the density and velocity of the air at the nozzle exit plane?
Answers: 2
Other questions on the subject: Engineering
Engineering, 04.07.2019 18:20, ashleyjaslin
Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.
Answers: 3
Engineering, 04.07.2019 19:10, nbunny7208
What is the chief metrological difference between measuring with a microscope and with an electronic comparator? a. the microscope is limited to small workpieces. a. the microscope is limited to small workpieces. c. the comparator can only examine one point on the workpiece. d. the microscope carries its own standard.
Answers: 1
Engineering, 06.07.2019 05:30, yami4458
Aspring-mass system consists of a mass weighing 20 kg and a spring with stiffness of 1000 n/m. the mass is subjected to resonance by a harmonic force f(t) 20 cos wt n. the initial condition is given as the initial position 0 and the initial velocity 0. find the amplitude of the forced motion at the end of (a) 1.5 cycle and (b) 2.25 cycles
Answers: 2
Do you know the correct answer?
Alarge chamber contains air at 80 psia and 600 r at zero velocity. the air enters a converging- dive...
Questions in other subjects:
Physics, 12.10.2019 23:30
