Engineering, 14.09.2019 02:30, daplol22222
Amultistage axial flow compressor is required for compressing air at 20°c, through a pressure ratio of 5, each stage is to be 50% reaction and mean blade speed 275 m/s. flow co-efficient is 0.5 and stage loading factor is 0.3 (taken constant for all stages for simplicity). a) determine the flow angles and number of stages required if polytropic efficiency is 59%. take cp =1.005 kj/kg/k. b) calculate overall efficiency.
Answers: 2
Engineering, 04.07.2019 18:10, keigleyhannah30
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
Engineering, 04.07.2019 18:10, lowkeyqueenk
Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk
Answers: 1
Engineering, 04.07.2019 18:10, Tyrant4life
Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.
Answers: 1
Engineering, 04.07.2019 18:10, demarcuswiseman
Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.
Answers: 3
Amultistage axial flow compressor is required for compressing air at 20°c, through a pressure ratio...
Mathematics, 13.01.2021 01:00
Geography, 13.01.2021 01:00
Business, 13.01.2021 01:00
Mathematics, 13.01.2021 01:00
Mathematics, 13.01.2021 01:00
Mathematics, 13.01.2021 01:00