Engineering, 14.09.2019 01:20, bellabarfield4286

Afan was in use at a site where the usual atmospheric pressure and temperature were 101,3 kpa and 15°c, respectively. it was delivering 20 m3/s of air against a total pressure of 1520 pa and it absorbed 40 kw. it was belt driven at 1250 r/min. the fan was subsequently moved to a site where the atmospheric pressure and temperature are 80 kpa and 30°c, respectively. if the motor is now direct-coupled to the fan and drives it at 1460 r/min, calculate : a)- the flow rate. b)- the power required. c)- the fan efficiency. given : gas constant for air rair = 287 j/kg. k

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, cowgyrlup124

Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.

Answers: 1

continue

Engineering, 04.07.2019 18:10, kevin72836

Consider a large isothermal enclosure that is maintained at a uniform temperature of 2000 k. calculate the emissive power of the radiation that emerges from a small aperture on the enclosure surface. what is the wavelength ? , below which 10% of the emission is concentrated? what is the wavelength ? 2 above which 10% of the emission is concentrated? determine the wavelength at which maximum spectral emissive power occurs. what is the irradiation incident on a small object placed inside the enclosure?

Answers: 2

continue

Engineering, 04.07.2019 18:10, caitlynnpatton1208

Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.

Answers: 3

continue

Engineering, 04.07.2019 18:20, 21megoplin

How much power could a wind turbine produce if it had the following specifications? cp = 0.45 -d=1.2kg/m3 d=50m v 5m/s

Answers: 2

continue

Do you know the correct answer?

Afan was in use at a site where the usual atmospheric pressure and temperature were 101,3 kpa and 15...