Engineering, 14.09.2019 00:30, Destinyb9806
Ametallic material with yield stress of 140 mpa and cross section of 300 mm x 100 mm, is subjected to a tensile force of 8.00 mn. will the sample experience plastic deformation? you must justify your answer.
Answers: 2
)
Other questions on the subject: Engineering
Engineering, 04.07.2019 18:10, tobyhollingsworth178
Which from the following instrument is commonly used to detect the high pitch butzing sound in bearings? [clo4] a)-digital ultrasonic meter b)-infrared camera c)-spectroscopic d)-vibrometer
Answers: 2
Engineering, 04.07.2019 18:10, krystabrewer3
What are the two (02) benefits, which may result from a successful implementation of preventive maintenance (pm) program in an organization? (clo3)a)- lean manufacturing b)-overlapping responsibilities c)-the planner is not qualified d)-accurate contractor information e)-reduction in equipment redundancies f)-accurate stores information
Answers: 3
Engineering, 04.07.2019 18:20, maustin5323
Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]
Answers: 1
Do you know the correct answer?
Ametallic material with yield stress of 140 mpa and cross section of 300 mm x 100 mm, is subjected t...
Questions in other subjects:
Spanish, 26.03.2020 23:04
Mathematics, 26.03.2020 23:04
