Engineering
Engineering, 14.09.2019 00:30, jalenshayewilliams

Astraight sided cam has both sides tangential to the base of the circle which is 25mm radius and the total angle of action is 120 degrees. a lift of 10mm diameter is given to a roller 20mm diameter, the centre of which moves along a straight line passing through the axis of the cam. the camshaft has a speed of 240rev/min. determine the following: the radius of the nose arc; the speed of the roller centre when the roller is in contact with the cam at the end of one of the straight flanks adjacent to the nose ; the greatest acceleration of the roller center;

answer
Answers: 2

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, tjeffers90028
Refrigerant 134a enters an insulated compressor operating at steady state as saturated vapor at -26°c with a volumetric flow rate of 0.18 m3/s. refrigerant exits at 9 bar, 70°c. changes in kinetic and potential energy from inlet to exit can be ignored. determine the volumetric flow rate at the exit, in m3/s, and the compressor power, in kw.
Answers: 1
image
Engineering, 04.07.2019 18:10, lerasteidl
Determine whether or not it is possible to compress air adiabatically from k to 140 kpa and 400 k. what is the entropy change during this process?
Answers: 3
image
Engineering, 04.07.2019 18:20, 1230bering
Select any two (2) areas of applications of chain-drive. (clo4) a)-permanent lubrication necessary b)-hydraulic forklift truck operation c)-rigging and heavy moving materials d)-relatively high maintenance costs e)-costlier than belt drives
Answers: 2
image
Engineering, 04.07.2019 18:20, RiverH246
Air flows over a heated plate àt a velocity of 50m/s. the local skin factor coefficient at a point on a plate is 0.004. estimate the local heat transfer coefficient at this point. the following property data for air are given: density = 0.88kg/m3 , viscosity 2.286 x 10 ^-5 kgm/s , k = 0.035w/mk ,cp = 1.001kj/kgk. use colburn reynolds analogy.
Answers: 1
Do you know the correct answer?
Astraight sided cam has both sides tangential to the base of the circle which is 25mm radius and the...

Questions in other subjects:

Konu
History, 30.11.2020 18:20