(a) calculate the ratio of the maximum radial stresses at the edge and centre of a flat circular steel plate clamped at its periphery and subjected to a uniform pressure p. ν=0.29. (b) calculate the ratio of the maximum tangential stresses at the edge and centre.

Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.

What precautions should you take to prevent injuries when dealing with heavy loads?

Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.