Engineering, 14.09.2019 00:10, kaitlyn4576

Asimple vapor compression refrigeration system uses r-22 as the working fluid. the evaporator pressure is 3 bar and the condenser pressure is 20 bar. the cooling load is 225 tons, the refrigerant exits the evaporator at 0 c and it exits the compressor at 160°c. (1 ton 3.517 kw). 2. a. plot and label all 5 points on the provided p-h diagram. b. determine the power input to the compressor, in kw. c. determine the rate of heat rejection from the condenser, in kw. d. determine the cop of the system. e. determine the compressor efficiency

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, ashleybaber4966

If a particle moves along a path such that r : (3 sin t) m and ? : 2t rad, where t is in seconds. what is the particle's acceleration in m/s in 4 seconds? a)- 16.43 b)- 16.29 c)- 15.21 d)- 13.79

Answers: 1

continue

Engineering, 06.07.2019 04:10, trist22

An inventor claims to have developed a reversed heat engine (ie. a heat pump) which is able to deliver 10 kj heat into the room at 20°c from outside ambient temperature of -10°c by consuming only 2 kj electricity in winter. this claim is a)-impossible b)-possible only if the heat pump is ideal c)-practically possible d)-unable to be assessed as it depends on the working fluid used in the heat pump.

Answers: 2

continue

Engineering, 06.07.2019 04:10, johnbobjones

Aheat pump that operates on the ideal vapor compression cycle with refrigerant-134a is used to heat water from 15°c to 45°c at a rate of 0.12 kg/s. the condenser and evaporator pressures are 1.4 and 0.32 mpa, respectively determine: (a) the power input to the heat pump

Answers: 1

continue

Engineering, 06.07.2019 04:20, angeles86

Explain the similarities and differences in the design guidelines for turning and for

Answers: 1

continue

Do you know the correct answer?

Asimple vapor compression refrigeration system uses r-22 as the working fluid. the evaporator pressu...