Engineering
Engineering, 13.09.2019 23:30, pyrkest4688

Exhaust gases flowing through a double-pipe heat exchanger at a rate of 0.3 kg/s are to be cooled from 400ºcto 120ºc by water in the annulus initially at 10ºc. the inner pipe has a diameter of 33 cm and negligible thickness. the specific heat capacities of the gases and water may be taken as 1130 and 4190 j/kgk respectively, and the gas and water heat transfer coefficients are 150 and 665 w/m2k. find the heat exchanger length required when the cooling water flow is 0.4 kg/s, (a) for parallel flow and (b) for counter flow.

answer
Answers: 3

Other questions on the subject: Engineering

image
Engineering, 03.07.2019 14:10, aliceohern
The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite
Answers: 3
image
Engineering, 04.07.2019 16:10, TheOriginalMeyah
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
image
Engineering, 04.07.2019 18:10, ashleybaber4966
If a particle moves along a path such that r : (3 sin t) m and ? : 2t rad, where t is in seconds. what is the particle's acceleration in m/s in 4 seconds? a)- 16.43 b)- 16.29 c)- 15.21 d)- 13.79
Answers: 1
image
Engineering, 04.07.2019 18:10, settasav9641
Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.
Answers: 3
Do you know the correct answer?
Exhaust gases flowing through a double-pipe heat exchanger at a rate of 0.3 kg/s are to be cooled fr...

Questions in other subjects: