Engineering, 13.09.2019 23:30, klorpo4055
Steam enters a turbine at 300 c and exhausts at 20 kpa. if the isentropic efficiency of the turbine is 70%, what is the maximum turbine inlet pressure if the exhaust is not to be in the two-phase region?
Answers: 2
Engineering, 04.07.2019 18:10, bckyanne3
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 18:10, winterblanco
The higher the astm grain-size number, the coarser the grain is. a)-true b)-false
Answers: 3
Engineering, 04.07.2019 18:10, samanthabutryn
Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan
Answers: 3
Steam enters a turbine at 300 c and exhausts at 20 kpa. if the isentropic efficiency of the turbine...
Mathematics, 12.02.2021 03:40
Mathematics, 12.02.2021 03:40
Mathematics, 12.02.2021 03:40
Mathematics, 12.02.2021 03:40