Engineering, 13.09.2019 23:30, StephiUnicorni

The volume of a 1-kg copper sphere is not allowed to vary by more than 0.1%. if the pressure exerted on the sphere is increased from 10 bar while the temperature remains constant at 300 k, determine the maximum allowed pressure, in bar. average values of rho, β and κ are kg/m^3, 49.2 × 10^-6 (k)^-1, and 0.776 × 10^-11m2/n respectively

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:20, hayleymckee

Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent

Answers: 2

continue

Engineering, 04.07.2019 19:10, santosbeti90

With increases in magnification, which of the following occur? a. the field of view decreases. b. the ambient illumination decreases. c. the larger parts can be measured. d. the eyepiece must be raised.

Answers: 1

continue

Engineering, 04.07.2019 19:10, lexie223

Acircular aluminum shaft mounted in a journal is shown. the symmetric clearance gap between the shaft and journal is filled with sae 10w-30 oil at t 30°c. the shaft is caused to turn by the attached mass and cord. develop and solve a differential equation for the angular speed of the shaft as a function of time.

Answers: 2

continue

Engineering, 04.07.2019 19:20, mads000

Determine (a) the maximum thermal efficiency of reversible power cycles operating between a hot reservoir at 1000°c and a cold reservoir at 200°c and (b) the maximum cops for reversible refrigeration and heat pump cycies, respectively, between 28°c and 14°c.

Answers: 1

continue

Do you know the correct answer?

The volume of a 1-kg copper sphere is not allowed to vary by more than 0.1%. if the pressure exerted...