Engineering, 13.09.2019 23:30, gianni0
Abatch dryer removes water from a solid at a rate of 30 kg/hr during the constant rate period. critical moisture content is 0.25 kg h2o dry solid. the equilibrium moisture content of the material is 0.035 kg h2o dry solid. the drier is initially charged with 750 kg of total material, which contains 2 00 000 g of moisture. the final product should contain 0.08 kg h2o dry solid. the falling rate period can be represented by a straight line. the total drying area is 5 m^2 . 1. draw a schematic diagram that depicts the process. 2. determine the total drying time to produce the product.
Answers: 1
Other questions on the subject: Engineering
Engineering, 04.07.2019 18:10, alyssabailey7545
Give heat transfer applications for the following, (i) gas turbines (propulsion) ) gas turbines (power generation). (iii) steam turbines. (iv) combined heat and power (chp). (v) automotive engines
Answers: 1
Engineering, 04.07.2019 18:10, lillygrl100
For the closed feedwater heater below, feedwater enters state 3 at a pressure of 2000 psia and temperature of 420 °f at a rate of ix10 ibhr. the feedwat extracted steam enters state 1 at a pressure of 1000 psia and enthalpy of 1500 btu/lbm. the extracted er leaves at an enthalpy of 528.7 btu/lbm steam leaves as a saturated liquid. (16) a) determine the mass flow rate of the extraction steam used to heat the feedwater (10) b) determine the terminal temperature difference of the closed feedwater heater
Answers: 3
Engineering, 04.07.2019 18:10, johnthienann58
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
Engineering, 04.07.2019 18:10, lowkeyqueenk
Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk
Answers: 1
Do you know the correct answer?
Abatch dryer removes water from a solid at a rate of 30 kg/hr during the constant rate period. criti...
Questions in other subjects:
