Atension specimen has the initial length, width and thickness of 100 mm, 10 mm, and 2 mm, respectively. the test specimen was pulled until fracture. the maximum load registered on the tension machine was 360n and the load at fracture was 320n. knowing that the specimen length at fracture was 130 mm, determine (a) the ultimate tensile strength (uts) of the test material (b) the percent strain at fracture (ductility) and (c) what metal this may be

A3-mm-thick panel of aluminum alloy (k 177 w/m-k, c 875 j/kg-k and ? = 2770 kg/m) is finished on both sides with an epoxy coating that must be cured at or above t,-150°c for at least 5 min. the production line for the curing operation involves two steps: (1) heating in a large oven with air at ts,0-175°c and a convection coefficient of h, 40 w/m2. k, and (2) cooling in a large chamber with air at 25°c and a con- vection coefficient of he 10 w/m2.k. the heating portion of the process is conducted over a time interval te which exceeds the ime required to reach 150°c by 5 min (h = r + 300 s). the coating has an emissivity of ? = 0.8, and the temperatures of the oven and chamber walls are 175 and 25°c, respectively. if the panel is placed in the oven at an initial temperature of 25°c and removed from the chamber at a safe-to-touch tempera ture of 37°c, what is the total elapsed time for the two-step curing operation?