Engineering
Engineering, 13.09.2019 20:10, aidy3259

Two reversible power cycles are arranged in series. thefirst
cycle recieves energy by heat transfer from a hot reservoirat
temperature th, and rejects energy by heat transfer to areservoir
at an intermediate temperature t < th. thesecond cycle recieves
energy by heat transfer from the reservoir attemperature t and
rejects energy by heat transfer to a coldreservoir at temperature
tc < t.
a) obtain an expression for the thermal efficiency of a
singlereversible power cycle operating between hot and cold
reservoirs atth and tc, respectively, in terms of the thermal
efficiencies ofthe two cycles.
b) obtain an expression for the intermediate temperature t
interms of th and tc for the special case where the
thermalefficiencies are equal.

answer
Answers: 2

Other questions on the subject: Engineering

image
Engineering, 03.07.2019 14:10, kayabwaller4589
When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point
Answers: 3
image
Engineering, 03.07.2019 15:10, EmilySerna
Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.
Answers: 1
image
Engineering, 04.07.2019 18:10, koolgurl2003
Apump is used to circulate hot water in a home heating system. water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. the inlet pressure and temperature are 14.7 lbf/in.2, and 180°f, respectively; at the exit the pressure is 60 lbf/in.2 the pump requires 1/15 hp of power input. water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 btu/lb or. neglecting kinetic and potential energy effects, determine the temperature change, in °r, as the water flows through the pump.
Answers: 1
image
Engineering, 04.07.2019 18:20, xcapo1x
Refrigerant-134a enters the compressor of a refrigerator as superheated vapor at 0.14 mpa and -10°c at a rate of 0.05 ka/s and leaves at 0.8 mpa and 50°c. the refrigerant is cooied in the condenser to 0.72 mpa and 26'c. it is then throttled to 0.15 mpa. sketch the t-s diagram for the system and evaluate: 6) the rate of heat removai from the refrigerated space (kw), it) the power input to the compressor (kw), ii) the isentropic efficiency of the compressor (%), and iv) the cop of the refrigerator.
Answers: 2
Do you know the correct answer?
Two reversible power cycles are arranged in series. thefirst
cycle recieves energy by heat tra...

Questions in other subjects:

Konu
Mathematics, 23.01.2020 12:31
Konu
Mathematics, 23.01.2020 12:31
Konu
Computers and Technology, 23.01.2020 12:31