Engineering, 13.09.2019 17:20, ronniethefun

Afactory discharges its waste into a river upstream from a lake.
the discharge release rate is 2 kg formaldehyde per day. the decay
is a first order process with a decay rate of 0.5/s. the waste
is discharge into the river 30 km upstream from the lake through an
effective diffuser. the river flow velocity is 6 km/d. the
volumetric flow rate for the river is 106 m3/d. the lake has
dimensions of 4,000 m long by 600 m wide by 8 m deep. (total volume
is 1.92 x 107 m3). there is an outlet stream from the lake with a
flow rate of 106 m3/d.
1. estimate the formaldehyde concentration in the lake using the
plug flow model for the river and the completely mixed model for
the lake.

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, ahmedeldyame

Aloaded platform of total mass 500 kg is supported by a dashpot and by a set of springs of effective stiffness 72 kn/m. it is observed that when the platform is depressed through a distance x = 12.5 cm below its equilibrium position and then released without any initial velocity; it reaches its equilibrium position in the shortest possible time without overshoot. find the position and velocity of the loaded platform 0.10 sec. after its release. if a further load of 400 kg is added to the platform, find, i) the frequency of damped vibrations, and i) the amplitude of vibration after 2 complete oscillations, given that the initial amplitude is 15 cm.

Answers: 1

continue

Engineering, 04.07.2019 18:10, settasav9641

Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.

Answers: 3

continue

Engineering, 04.07.2019 18:10, bunnles

During a steady flow process, the change of energy with respect to time is zero. a)- true b)- false

Answers: 2

continue

Engineering, 04.07.2019 18:10, skpdancer1605

Ariver flows from north to south at 8 km/h. a boat is to cross this river from west to east at a speed of 20 km/h (speed of the boat with respect to the earth/ground). at what angle (in degrees) must the boat be pointed upstream such that it will proceed directly across the river (hint: find the speed of the boat with respect to water/river)? a 288 b. 21.8 c. 326 d. 30.2

Answers: 3

continue

Do you know the correct answer?

Afactory discharges its waste into a river upstream from a lake.
the discharge release rate is...