It is necessary to lay out and mark a point d exactly 300.00 ft distant from point c for a construction project. a steel tape with an actual length of 100.03 ft is used. what should be the distance measured from c to accurately set the mark for point d? (assume a standard 20 lb tension is used, and temperature of 68of)

An engine, weighing 3000 n, is supported on a pedestal mount. it has been observed that the engine induces vibration into the surrounding area through its pedestal at the maximum operating speed. determine the stiffness of the dynamic vibration absorber spring in (n/m) that will reduce the vibration when mounted on the pedestal. the magnitude of the exciting force is 250 n, and the amplitude of motion of the auxiliary mass is to be limited to 2 mm note: in this question type-in right numbers, no decimals, no fractions, no unit. approximate to right number if needed