Engineering
Engineering, 10.09.2019 21:20, shonnap1

Agrandfather's clock is calibrated at a temperature of 19°c. assume that the pendulum is a thin brass rod of negligible mass with a small, heavy bob attached to the end. the coefficient of linear expansion of brass is 1.9☓10-5 (°c)-1. 1) on a hot day, when the temperature is 28°c, does the clock run fast or slow? the clock runs fast. the clock runs slow. the clock remains unchanged. you currently have 2 submissions for this question. only 10 submission are allowed. you can make 8 more submissions for this question. 2) how much does it gain or lose in a 24 h period? s you currently have 1 submissions for this question. only 10 submission are allowed.

answer
Answers: 2

Other questions on the subject: Engineering

image
Engineering, 03.07.2019 14:10, volleyballfun24
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
image
Engineering, 03.07.2019 15:10, breannaasmith1122
Two flowing streams of argon gas are adiabatically mixed to form a single flow/stream. one stream is 1.5 kg/s at 400 kpa and 200 c while the second stream is 2kg/s at 500 kpa and 100 ? . it is stated that the exit state of the mixed single flow of argon gas is 150 c and 300 kpa. assuming there is no work output or input during the mixing process, does this process violate either the first or the second law or both? explain and state all your assumptions.
Answers: 1
image
Engineering, 03.07.2019 19:30, 10040813
When using the ohmmeter function of a digital multimeter, the leads are placed in what position relative to the component being tested? a. parallel b. control c. series d. line
Answers: 3
image
Engineering, 04.07.2019 18:10, settasav9641
Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.
Answers: 3
Do you know the correct answer?
Agrandfather's clock is calibrated at a temperature of 19°c. assume that the pendulum is a thin bras...

Questions in other subjects:

Konu
English, 26.04.2021 07:30