Engineering, 07.09.2019 00:30, asmaamasto

Areversible heat pump and a carnot heat pump operate between the same two thermal reservoirs. which heat pump has higher cop?

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 19:20, littlepotato10

To save energy, the air supply to a 2000 ft office has been shut off overnight and the room temperature has dropped to 40°f. in the morning, the thermostat is reset to 70°f and warm air at 120 f begins to flov in at 200ft'/min. the air is well mixed within the room, and an equal mass flow of air at room temperature (changing with time) is withdrawn through a return duct. the air pressure is nearly 1 atm everywhere. ignoring heat transfer with the surroundings and kinetic and potential energy effects, estimate how long it takes for the room temperature to reach 70°f. plot the room temperature as a function of time.

Answers: 1

continue

Engineering, 04.07.2019 19:20, amandaaarmentaa

Acircular pipe of 30mm outside diameter is placed in an airstream at 30 c and latm pressure. the air moves in cross flow over the pipe at 20 m/s, while the outer surface of the pipe is maintained at 110 c. what is the drag force exerted on the pipe per unit length? what is the rate of heat transfer from the pipe per unit length?

Answers: 1

continue

Engineering, 06.07.2019 04:20, taytay2912

Aflow moves in the x direction with a velocity of 10 m/s from 0 to 0.1 second and then reverses direction with the same speed from 0.1 to 0.2 second. sketch the pathline strating from x-0 and the streak! ine with dye introduced at x=0. show the streamlines for the first time interval and the second time interval.

Answers: 3

continue

Engineering, 06.07.2019 05:20, emmanuel96

The inner surface of a 0.25m thick brick wall of a furnace is kept at 810ºc, when the outside surrounding air is at 22ºc. the convective heat transfer coefficient of the outer surface is 12 w/m2k and the thermal conductivity of the brick is 0.865 w/mk. neglect the convective resistance for the inner side of the furnace and assume that the problem is steady state and thermal radiation is neglected. (a)-sketch the system and calculate the rate of heat loss per unit wall area. (b)-calculate the temperature of the outer wall surface.

Answers: 2

continue

Do you know the correct answer?

Areversible heat pump and a carnot heat pump operate between the same two thermal reservoirs. which...