Engineering, 03.09.2019 20:30, emma5165
If the bolt has a stiffness of kb = 200 mn/mm, and the thickness of the members are such that the stiffness of the member is km = 500 mn/mm and the plates are held in position by two bolts, determine the overload and separation factor of safety when the plates are under a tensile load of 8 n. the bolt has a proof strength of 586 n/mm2 and tensile area, at of 36.6 mm2. comment on whether the joint will separate or not and explain your comment.
Answers: 1
Engineering, 04.07.2019 18:10, DestyHilBan1183
Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.
Answers: 3
Engineering, 04.07.2019 18:10, wyattlb97
Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?
Answers: 3
Engineering, 04.07.2019 18:20, samantha636
Avolume of 2.65 m3 of air in a rigid, insulated container fitted with a paddle wheel is initially at 264 k, 5.6 bar. the air receives 432 kj by work from the paddle wheel. assuming the ideal gas model with cv = 0.71 kj/kg • k, determine for the air the amount of entropy produced, in kj/k
Answers: 2
If the bolt has a stiffness of kb = 200 mn/mm, and the thickness of the members are such that the st...
Mathematics, 15.04.2021 04:30
Physics, 15.04.2021 04:30
Mathematics, 15.04.2021 04:30
Mathematics, 15.04.2021 04:30
Mathematics, 15.04.2021 04:30
Mathematics, 15.04.2021 04:30
Mathematics, 15.04.2021 04:30
History, 15.04.2021 04:30