You have a piece of 1045 steel 80 cm long and 30 cm wide and 15cm high. in this piece it is desired to make a groove along the 80 cm with a width of 8 cm with a depth of 10 cm. calculate the progress that the tool must have to make the groove in a time of 5 minutes. it assumes that for this operation an end mill flat tool of 4 mm diameter is used and its maximum axial cutting capacity is 50 mm.

0.65 m/min

Explanation:

The volume of material to be removed is

80*8*10 = 650 cm^3

The tool has a diameter of 4 mm and a maximum axial cutting capacity of 50 mm, so its cross section normal to advance is

0.4*5 = 2 cm^2

If the groove have to be made in T = 5 minutes the advance speed would be

V/(S * T)

650/(2 * 5) = 65 cm/min = 0.65 m/min

d would be the most obvious choice to this question. leaders are supposed to herd their underlings like a shepherd to sheep. a leader should also listen to others when they are talking to one other to gain a better understanding of their mission and surroundings.

explanation:

answer:

a

explanation: