Engineering, 30.08.2019 23:30, drastipatel18

You have a piece of steel with dimensions of 100 x 100 x 10 mm thick and you want to machine in a milling machine which has three end mill type tools with 4 lips, and 3, 12 and 20 mm diameter respectively. if you plan to machine with 4500 revolutions per minute and according to the characteristics of the material and the type of the tool it is recommended to have a feed per revolution of 0.0555 mm., calculate for each tool the following: a)- the cutting speed of the tool. b)- the advance of the tool. c)- the advance per tooth.

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 15:10, margaret1758

If you were designing a bumper for a car, would you prefer it to exhibit elastic or plastic deformation? why? consider the functions of a bumper in both a minor "fender-bender" and a major collision.

Answers: 1

continue

Engineering, 04.07.2019 18:10, Tyrant4life

Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.

Answers: 1

continue

Engineering, 04.07.2019 19:10, gabigalvis1091

What is the main objective of using reheat rankine cycle?

Answers: 3

continue

Engineering, 04.07.2019 19:10, nbug2121

Arigid tank contains 10 kg of air at 137 kpa (abs) and 21°c. more air is added to the tank until the pressure and temperature rise to 242 kpa (abs) and 32°c, respectively. determine the amount of air added to the tank. [r-0.287 kj/kg k]

Answers: 3

continue

Do you know the correct answer?

You have a piece of steel with dimensions of 100 x 100 x 10 mm thick and you want to machine in a mi...