Engineering
Engineering, 30.08.2019 00:20, aguerobia

Copper tubes are produced by horizontal true centrifugal casting. the tube 2.4 lengths 2.0 m, outside diameter 16.0 cm, and inside diameter 15.0 cm. if the rotational speed of the pipe 900 rev/min, determine the g-factor.

answer
Answers: 3
Show answers

Similar questions

Предмет
Engineering, 07.08.2019 18:30, ChocCole
Consider a horizontal collector tube of a parabolic solar collector with a diameter of 6 cm. water is heated in the tube as it enters it and picks up the absorbed solar energy. this tube is enclosed in a concentric glass tube of 10 cm in diameter. the space between the two tubes is filled with air at 100 kpa. assuming the temperature of the glass is 40 c and the tube is at 70 c, find the rate of heat loss from the absorber tube per unit length of tube.
Answers: 1
continue
Предмет
Engineering, 24.09.2019 22:00, tiaharris3191
True centrifugal casting is performed horizontally to make copper tube sections. the tubes have a length = 1.0 m, diameter = 0.25 m, and wall thickness = 15 mm. a.) if the rotational speed of the pipe = 700 rev/min, determine the g-factor on the molten metal. b.) is the rotational speed sufficient to avoid "rain"? c.) what volume of molten metal must be poured into the mold to make the casting if solidification shrinkage and solid thermal contraction for copper are = 4.5% and 7.5%, respectively (both are volumetric contractions).
Answers: 3
continue
Предмет
Chemistry, 31.10.2019 00:31, Deavionaaaaa
Ashell-and-tube type condenser is to be made with 3/4 in. outer diameter (0.654 in. inner diameter) brass tubes, and the length of the tubes between tube plates is 3 m. under the worst conditions, cooling water is available at 21°c and the outlet temperature is 31°c. water velocity inside the tubes is approximately 2 m/s. the vapor side film coefficient can be taken as 10,000 w/m^2 ⋅ k. calculate the overall heat transfer coefficient for this heat exchanger.
Answers: 2
continue
Do you know the correct answer?
Copper tubes are produced by horizontal true centrifugal casting. the tube 2.4 lengths 2.0 m, outsid...

Questions in other subjects:

Konu
Mathematics, 12.03.2020 03:39
Consider an AC circuit consisting of a power supply and a resistor. If the current in the circuit at time t is /, then the power delivered to the resistor is /, where R is the resi...
Konu
English, 12.03.2020 03:39
Woodrow Wilson was referring to the liberal idea of the economic market when he said that the free enterprise system is the most efficient economic system. Maximum freedom means ma...
Konu
Business, 12.03.2020 03:39
Councilwoman moore stepped up to the podium. "i don't think i need to upon reasons for voting against the proposed construction; i thought that the message was clear enough at the...
Konu
Business, 12.03.2020 03:39
Cortez art gallery is adding to its existing buildings at a cost of $2 million. the gallery expects to bring in additional cash flows of $520,000, $700,000, and $1,000,000 over the...
Konu
Mathematics, 12.03.2020 03:39
David's salary totals $79,000 per year. He can expect to pay federal income tax at a rate of 23.60%. How much money will David pay in federal income taxes every year? a. $60,356 b....
Konu
Business, 12.03.2020 03:39
A. If Swannanoa Company's budgeted sales are $1,000,000, fixed costs are $350,000, and variable costs are $600,000, what is the budgeted contribution margin ratio...
Konu
Engineering, 12.03.2020 03:39
Design a multiple-output logic circuit whose input is a BCD digit and whose outputs are defined as follows: 1f: Detects input digits that are divisible by 4, 2f: Detects numbers gr...
Konu
Physics, 12.03.2020 03:39
An experimental 1500-kg car travels at a constant speed of 22 m/s around a circular test track that is 80 m across. What is the kinetic energy of the car...
Konu
Business, 12.03.2020 03:39
During the year, Calabash Clinic made a $50,000 cash payment toward its bank loan, which it had previously recorded; $40,000 was for principal, and $10,000 was to pay the full amou...
Konu
Mathematics, 12.03.2020 03:39
What are the chances of getting heads two times in a row in a coin toss?...
Other tasks in the category: Engineering More task
See results (0)