Engineering
Engineering, 29.08.2019 18:10, preservations

The extrusion die for a polyethylene parison used in blow molding has a mean diameter of 20.0 mm. the size of the ring opening in the die 2.0 mm. the mean diameter of the parison is observed to swell to a size of 23.0 mm after exiting the die orifice. if the diameter of the blow-molded container = 125 mm, determine: (a) the corresponding wall thickness of the final container, (b) the inside diameter of the parison.

answer
Answers: 1

Other questions on the subject: Engineering

image
Engineering, 03.07.2019 14:10, aliceohern
The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite
Answers: 3
image
Engineering, 04.07.2019 18:10, DestyHilBan1183
Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.
Answers: 3
image
Engineering, 04.07.2019 18:10, johnthienann58
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
image
Engineering, 04.07.2019 18:20, kodyclancy
Aquick transition of the operating speed of a shaft from its critical speed will whirl amplitude. (a) increase (b) limit (c) not affect (d) zero
Answers: 2
Do you know the correct answer?
The extrusion die for a polyethylene parison used in blow molding has a mean diameter of 20.0 mm. th...

Questions in other subjects:

Konu
Mathematics, 28.03.2021 01:00
Konu
Physics, 28.03.2021 01:00