Engineering
Engineering, 29.08.2019 17:20, punkinrichard1oxon2i

Ashell-and-tube heat exchanger is used for heating 15 kg/s of oil (cp = 2.0 kj/kg · k) from 20°c to 46°c. the heat exchanger has one shell pass and six tube passes. water enters the shell side at 85°c and leaves at 65°c. the overall heat transfer coefficient is estimated to be 1000 w/m2 · k. calculate the rate of heat transfer and the heat transfer area.

answer
Answers: 1

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, aliopqwas
Condition monitoring is a major component of. (clo4) a)- predictive maintenance. b)-preventive maintenance c)-proactive maintenance d)-reactive maintenance.
Answers: 1
image
Engineering, 04.07.2019 18:20, kendrawalraven
The characteristic roots of a dynamic system are: 1.7920 1.8160 i, -1.7920 1.8160 i, -0.4160 what is the order of this system? what are the settling time and damping ratio of the system?
Answers: 3
image
Engineering, 04.07.2019 18:20, annette211pdd8v9
For a gate width of 2 m into the paper, determine the force required to hold the gate abc at its location.
Answers: 1
image
Engineering, 04.07.2019 19:10, kelseiroll9759
Ahelical coil spring has a mean diameter of 50 mm, a wire diameter of 5.5 mm and is wound with a pitch of 10 mm. the spring steel has an ultimate strength of 1250 mpa. find the force needed to compress the spring solid and the wire stress in this condition. state whether the spring will return to its initial length.
Answers: 1
Do you know the correct answer?
Ashell-and-tube heat exchanger is used for heating 15 kg/s of oil (cp = 2.0 kj/kg · k) from 20°c to...

Questions in other subjects: